Summary
Kunishige cycloid reducer is used K-H-V few teeth difference planetary transmission principle of novel transmission machinery and cycloidal pinwheel meshing, widely used in textile printing and dyeing, light food, metallurgy, petroleum chemical industry, the field of lifting transportation and construction machinery in the drive and speed reducer. "Guomao" brand cycloidal reducer excellent quality, reliable performance, complete specifications, reasonable price, won the Ministry of machinery industry and the high quality product of Jiangsu province.
All planetary cycloid reducer transmission device can be divided into three parts: the input part, the deceleration part and output part. Double eccentric sleeve is provided with a dislocation of 180 degrees on the input shaft, two roller bearings in the eccentric sleeve is provided, the formation mechanism of H, the two is the center hole of the cycloid roller bearing eccentric sleeve, and the pin gear set are arranged in a ring cycloidal gear and pin gear phase engaged to form a small tooth difference reducer (in order to reduce friction, gear ratio in small, with a needle tooth pin gear). When the input shaft with an eccentric sleeve to rotate in a week, because of the characteristics of the cycloid gear tooth curve and the needle on the porch of the pin gear tooth limit, cycloidal motion is plane motion as revolution and rotation, the input shaft rotates one circle, eccentric sleeve also rotates a circle, cycloid gear in the opposite direction to turn one tooth difference so as to get slow, and then using the W output mechanism, cycloidal wheel rotation speed will be through a pin shaft, is transmitted to the output shaft, so as to obtain the output low speed.
B (X) W series cycloid
B (X) L series cycloid
main features
A high speed ratio and high efficiency advanced transmission, can achieve 1:87 reduction ratio, efficiency is more than 90%, if the use of multistage transmission, gear ratio greater.
Due to the small size and compact structure, two planetary transmission principle, the input shaft and the input shaft in the same axis, so the structure is compact, small size.
Three, stable operation low noise cycloid gear number, large overlap coefficient and has stable mechanical mechanism, the vibration and noise to a minimum degree.
Four, the use of reliable and long service life, because the main components used in bearing steel, quenched (HRC58-62) to obtain high strength, and the transmission department contact rolling friction, so durable long life. Reasonable design, convenient maintenance, easy installation and the minimum number of components of decomposition, and the simple lubrication, the cycloid reducer by the user's trust.
詩恩斯電氣
